Hayati Pro Max Plus Pods: 2026 Compatibility & Replacement Guide

Hayati Pro Max Plus pods are the official replacement pods for the Hayati Pro Max Plus 6000 device only , they hold 12ml of 20mg nicotine salt e-liquid across a 2ml pod and 10ml auto-refill container, and they're rated for up to 6,000 puffs per pod. They come sealed and factory-filled, so there's nothing to refill by hand, when one runs dry, you replace the whole pod. 

They are not compatible with the Pro Ultra Plus 25000 or any other Hayati model, regardless of how similar the pod looks. 

The rest of this guide covers exactly how the system works, how to swap a pod correctly, how long each one actually lasts, and how to tell a genuine pod from a fake before you buy.

E-Liquid Capacity, Nicotine Strength, & Packaging

Here's the full spec sheet in one place, so you're not hunting through product listings to confirm what you're buying.

Compatibility: Which Devices Actually Fit These Pods?

These pods fit one device: the Hayati Pro Max Plus 6000. They do not fit the Pro Ultra Plus 25000, older Hayati Pro Max (non-Plus) kits, or any other pod system, Hayati or otherwise. 

The pod's shape, its electrical contacts, and its auto-refill mechanism are all built specifically around the Pro Max Plus 6000's housing, so a pod that doesn't match won't seat correctly even if it looks close enough on the shelf.

The confusion usually comes from naming. "Pro Max," "Pro Max Plus," and "Pro Max Plus 6000" get used loosely across retailer listings, and the Pro Ultra Plus 25000 uses a visually similar dual-pod format that some buyers mistake for the same system. 

If you're not certain which device you own, check the model name printed on the device itself, or check the puff rating , 6,000 puffs points to the Pro Max Plus, 25,000 points to the Pro Ultra Plus, and they don't share pods.

How the 12ml TPD-Compliant System Works (2ml Pod + 10ml Container)

The Pro Max Plus pod works as two connected chambers rather than one simple tank. A 2ml pod sits at the top, next to the coil, while a 10ml container beneath it holds the bulk of the e-liquid and automatically feeds it into the 2ml chamber as you vape. 

You never touch or top up the 10ml side yourself , the transfer happens on its own, which is what lets the device deliver 12ml of e-liquid despite each individual chamber staying within legal limits.

That two-chamber design exists specifically for UK TPD compliance. Regulations cap any single sealed e-liquid tank at 2ml, so a straightforward 12ml pod wouldn't be legal to sell in the UK. Splitting the liquid across a compliant 2ml active chamber and a separate 10ml refill container keeps the device legal while still giving you a much longer puff count than a standard 2ml pod would manage on its own.

How to Replace Hayati Pro Max Plus Pods (Step-by-Step)

Swapping a pod takes under a minute once you've done it once, and there's no coil to change separately , the coil is built into the pod itself.

Remove the old pod. Pull it straight up and out of the device once the LED or flavour tells you it's finished. Clean the contacts. Wipe the device's metal contact points with a dry cloth or cotton bud to clear any residue before fitting the new pod. Unseal the new pod.

 Remove the rubber bung or seal from the base and the silicone cap from the mouthpiece , leaving either in place is the most common reason a fresh pod won't fire. Insert the new pod. Push it firmly into the slot until it clicks and sits flush with the device body. Wait before vaping. 

Give it a minute or two so the mesh coil can fully saturate with e-liquid before you take your first draw. Test with a gentle puff. Take one soft, steady inhale to confirm vapour production and flavour before vaping normally.

How Long Does Each Pod Last?

A single Hayati Pro Max Plus pod is rated for up to 6,000 puffs, which works out to roughly 5 to 14 days for a moderate vaper. 

Where you land in that range depends almost entirely on how often you're puffing and how long each draw is , someone taking short, occasional puffs will comfortably reach the upper end, while frequent, longer draws burn through the 12ml faster and land closer to five days. 

Treat 6,000 as a maximum under lab-style conditions rather than a guaranteed number, and don't be surprised if your own real-world count runs a little under it.

How to Spot Fake Hayati Pro Max Plus Pods (3-Step Verification)

Fake and clone pods circulate for popular lines like this one, and they're worth checking for before you use one; poor-quality clones are more likely to leak or damage the device's contacts.

• Check the QR code. Genuine Hayati Pro Max Plus pods carry a QR code on the packaging that links to the product's MHRA registration listing; if the code doesn't scan or doesn't resolve to a matching listing, treat the pod as suspect. 

• Check the price. A genuine single pod typically sells for somewhere in the £5–£7 range in the UK; anything dramatically cheaper than that from an unfamiliar seller is a red flag rather than a bargain. 

• Check the packaging. Genuine packs have crisp, consistent printing, a properly sealed box, and clear UK TPD labelling with nicotine warnings; blurry text, missing warnings, or a box that looks like it's been resealed are all signs to walk away.

Quick Troubleshooting: Burnt Taste & Airflow Issues

Most pod-related problems come down to one of two things: priming or airflow.

• Burnt taste almost always means the coil fired before it had time to soak up e-liquid , give a newly fitted pod a minute or two before your first draw, and avoid rapid back-to-back puffs straight after fitting it. If the burnt taste continues after that, the pod itself is likely faulty rather than under-primed. 

• Weak vapour or airflow issues usually trace back to a blocked air intake or a pod that isn't fully seated , check the pod has clicked all the way into place, and make sure nothing is covering the small airflow holes on the device body.

•  Leaking is normally down to a damaged seal or a pod that's been carried loosely and knocked out of position; reseat it firmly, and if liquid keeps escaping, replace the pod rather than continuing to use it.

Note: if your current pod's flavour has started to fade, don't wait for it to run completely dry , unseal a new one now, following the six steps above, so you're not caught without a working pod mid-week.

FAQs: What Buyers Actually Ask

Can I refill a Hayati Pro Max Plus pod myself? 

No. The pod is a sealed, factory-filled unit, and it isn't designed to be opened or topped up by hand. Attempting to refill it risks leaks and can damage the auto-refill mechanism, so replacing the whole pod is the correct method once it's empty.

Do Pro Max Plus pods fit the Pro Ultra Plus 25000?

 No. The two Pro Max Plus and  Pro Ultra Plus 25000 devices use different pod housings and contact layouts, so Pro Max Plus pods will not seat correctly in a Pro Ultra Plus device, and vice versa.

Why does my new pod taste burnt straight away? 

This is almost always a priming issue , give the pod a minute or two to soak the coil before your first draw. If the taste persists after that, the pod is likely faulty and should be replaced.

Are Hayati Pro Max Plus pods legal in the UK? 

Yes. They're TPD-compliant and MHRA-registered, with the e-liquid split across a 2ml sealed chamber and a 10ml refill container to stay within the UK's legal tank-capacity limit, and nicotine strength capped at 20mg/ml.

How do I know when a pod needs replacing? 

Watch for a drop in flavour, weaker vapour production, or a burnt taste that doesn't clear after priming , any of these means the 12ml of e-liquid is spent and it's time to fit a new pod.